Centro

A Power Wheelchair with Remarkable Stability and Driving Capabilities

Brand New Australian-Made Power Wheelchair

The all new Centro has all the features clients have been requesting in a Mid Wheel Drive for many years. Australian manufactured the Centro is designed to give remarkable stability and drive capabilities with trouble free service for many years.

 

ISO Standards Approved

175kgMaximum user weight

Battery  
Battery 50 or 70 amp/hr
Brakes  
Brakes Electronic and manual park
Colour  
Frame Colour Choice
Dimensions  
Back Height 1030mm Top of push handle (custom height available)
Overall Length 900mm (foot plate removed)
Overall Width 620mm (wheel base)
Seat Depth 31, 34, 37, 40, 43, 46, 49, 52, 55cm
Seat Height 46cm (top of rail)
Seat Width 31, 34, 37, 40, 43, 46, 49, 52, 55cm (custom width optional)
Operation  
Controls R-net std (optional Dynamic)
Range  
Travel Range 40 kl max with 70 amp/hr
Seating & Supports  
Arm Rests Flip up (adjustable)
Leg Rests Swing away detatchable
Seat Tilt 4-50 or 0-46 degree
Suspension  
Suspension APT
Weights  
Weight 82kg without batteries and upholstery
Weight Capacity 175kg AS 3695 Full compliance
Wheels  
Drive Wheels 3.00 - 8 (14")
Front Castors 200 -50 (8") pneumatic
Rear 6" solid

Power Base type with easily removable seating module.
Available in Adult and Paediatric versions.
Motors - High quality German motors for Centro - Choice of 2 pole or 4 Pole High torque.
Low seat height (46cm at 0 degrees).
50 or 70 amp/hr Batteries capabilities.
50 degree Tilt std.
Vehicle Tie Down points.
Low maintenance with easily accessible electronics.
Turn Circle between walls 1145mm (Average set up 46cm SD x 46cm SW).
80mm kerb climbing ability.
80mm Ground clearance.
Max Ramp Incline/Decline 15 deg or 1 in 4 (as per AS3695 testing)
Optional 300mm Vertical lift seat with 49cm seat rail height.
Optional Anterior Tilt.
Glide's all new seating system for Centro.
Compatiblity to most Proprietary Seating systems on the market.
Plus all the standard options offered with our range.

Active Pozi-Trak drive system (APT)

APT is a unique suspension system patented by Glide and was developed to enhance the performance of its latest Mid Wheel Drive wheelchair. The APT system is a three functional operation which increases traction on the Drive Wheels, aids with Kerb Climbing and acts as an Anti Pitch device. The suspension system also eliminates nose drive when descending road side kerbs.
The drive wheels are set positive meaning when the wheelchair is on a level ground a preload of up to 20kg (depending on spring set up type) is on each drive wheel. This unique system greatly improves traction for driving and braking. It also performs extremely well in emergency down hill braking.
This system is a very low maintenance system and has eliminated the need for complex moving parts that need constant servicing or adjustments. Also, with the combination of varying spring set ups, your wheelchair can be fine tuned to suit your driving preference e.g. biased for more traction or increased kerb climbing ability.

Safety

Crash tested to AS 3696:19 and Full compliance AS 3695 - 175kg

Back to menu

ISO Standards Approval

Australian Standards have been developed to ensure equipment meets recognised safety and reliability criteria. To achieve this status, equipment must pass a series of tests in which it is put under difficult conditions that are designed to be similar to those that the child or adult may face when the equipment is used. For example, wheelchairs are tested for safhas gained Australian Standard acceptance, it provides a sense of satisfaction and reassurance that it is safe to be used and will do the job.

© 2017 Xtra Care Equipment Follow us on Google+ Site by Bellevue Studios