Lightweight and Foldable Power Wheelchair
The HS-6200 comes in the most common seat size of 460 wide x 400 deep. People will often pay twice as much for basically the same chair to be custom made. A seat and backrest sling gives the freedom to use any cushions that you may need for comfort, pressure management and positioning. it is even possible to remove the backrest sling and setup with a modular backrest system for even greater comfort and support. Combine this flexibility and affordable price with CTM's proven reliability and this chair is hard to beat.
ISO Standards ApprovedModel: HS-6200
| Battery | |
|---|---|
| Battery | (2) 12V 36ah |
| Charger | 5 Ah Offboard |
| Dimensions | |
| Overall Height | 900mm |
| Overall Width | 610mm |
| Seat Width | 457mm 18 " |
| Dimensions (5680) | |
| Overall Length | 1075mm |
| Maneuverability | |
| Turning Radius | 980mm 38.6" |
| Motor | |
| Motor Size | 420W 4600 rpm |
| Operation | |
| Electronics | PG-VSI |
| Range | |
| Max Speed | 8 kmph / 5 mph |
| Travel Range | 19km 11.9 Miles |
| Seating & Supports | |
| Seat | padded breathable Ballistic Nylon Back Rest |
| Wheels | |
| Front | 200mm 8 inch |
| Rear | 320mm 13 inch |
CTM Warranty Policy, (93.7 kb)
CTM HS-6200 Owner's Manual, (1.7 mb)
Many of our products are sourced from different manufacturers and suppliers who have their own individual Warranty Policies. A general guide explaining warranty coverage can be found below. For more detailed information please refer to the warranty document above.
Any item purchased is warranted from the date of purchase against faults arising due to defects in materials or manufacturing.
Warranty does not cover parts or electrical components damaged by misuse, neglect, accident or improper installation, nor those tampered with, altered or serviced by an agency not authorized by the manufacturer.
Warranty does not cover normal wear and tear, eg tyres and tubes.
All warranty claims must be returned to us for assessment.
Often a client's circumstances require that an accessory and, or wheelchair be modified allowing for correct installation. If a joystick handle is not available in the right style or a foot plate will not sit on the right angle we will exhaust all possibilities in fabricating, adapting or doing whatever we have to do ensuring that they are able to operate and benefit from the accessory effectively.
Our extensive knowledge and total commitment to making a client comfortable and confident in their wheelchair is what drives our passion of uniqueness.
Mouse over images for larger view
Fits easily to rear of Power Wheelchair.
377100-28000
Fits easily to side of Wheelchair.
573710-89000
Fits easily to the rear of the Power wheelchair.
377300-28000
Mounts easily to rear of Power Wheelchair.
377400-28000
Easily fits on the rear of the Power Wheelchair.
375000-28000
There is no Overview for the CTM HS-6200 Power Wheelchair.
Australian Standards have been developed to ensure equipment meets recognised safety and reliability criteria. To achieve this status, equipment must pass a series of tests in which it is put under difficult conditions that are designed to be similar to those that the child or adult may face when the equipment is used. For example, wheelchairs are tested for safhas gained Australian Standard acceptance, it provides a sense of satisfaction and reassurance that it is safe to be used and will do the job.
© 2012 Xtra Care Equipment Site by Bellevue Studios
