Glide Recline Back and Tilt

Tilt in Space and Reclining Wheelchair

Enhanced Comfort and Posture

The Glide Recline Back & Tilt, based on the tilt seat the RBT also has the added benfit of a recline function to lower the back of the chair, as well as tilt it, this can create even more comfortable positions for the occupant with no stress being put on the carer with a simple gas filled extension tube that raises and lowers seating position.

ISO Standards Approved

100kgMaximum user weight

Model: GLRBT

Brakes  
Brakes Manual push on
Colour  
Frame Colours
Dimensions  
Overall Length 105cm
Overall Width This varies as the chair width increases or decreases
Seat Depth 40, 43, 46cm
Seat Width 37, 40, 43, 46, 49, 52cm
Materials  
Frame Stainless steel
Seating & Supports  
Arm Rests Full length with wider armpads
Back Recline 90 to 135 degrees via adjustable strut
Leg Rests Detachable manual elevating legrests
Seat Tilt Gas assisted tilt, hand operated
Seat Upholstery Hardwearing vinyl upholstery
Weights  
Chair Weight 20kg
Weight Capacity 100kg
Wheels  
Front Castors 175mm x 25mm MCP Solid
Rear 12-1/2" x 2-1/4" Pneumatic

Owner's Manual

Glide Recline Back and Tilt Chair Owner's Manual, (925.3 kb)

Order Form

Glide Recline Back and Tilt Wheelchair Order Form, (583.6 kb)

Warranty

Many of our products are sourced from different manufacturers and suppliers who have their own individual Warranty Policies.  A general guide explaining warranty coverage can be found below. For more detailed information please refer to the Warranty Section in the PDF Owner’s Manual above.

Any item purchased is warranted from the date of purchase against faults arising due to defects in materials or manufacturing.

Warranty does not cover parts or electrical components damaged by misuse, neglect, accident or improper installation, nor those tampered with, altered or serviced by an agency not authorized by the manufacturer.

Warranty does not cover normal wear and tear, eg tyres and tubes.

All warranty claims must be returned to us for assessment.

Custom Accessories & Fitting

Often a clients circumstances require that an accessory and or wheelchair be modified allowing for correct installation. If a joystick handle is not available in the right style or a foot plate will not sit on the right angle we will exhaust all possibilities in fabricating, adapting or doing whatever we have to do ensuring that they are able to operate and benefit from the accessory effectively.
 
Our extensive knowledge and total commitment to making a client comfortable and confident in their wheelchair is what drives our passion of uniqueness.

Mouse over images for larger view

Accessories

Anti Tip Rollers G1

Designed to reduce the chance of tipping under propulsion or braking.

To install, simply slide the anti tip bar over the sideframe, and tighten the locknut on the clamp to secure the bar to the sideframe.

Model:

10691

Carry Bag Backrest

Large rear mount carry bag, designed to hang from the backrest this bag has plenty of room for the storage of frquently used items.

Model:

1151

Carry Bag G2 Under Seat

G2 Under Seat Carry Bag

Model:

1152

Carry Bag Series 8 Backrest

Backrest carry bag for Series 6, 7, 8 and 9 powered wheelchair.

Model:

1154

Crutch Holder G1, G3

Crutch holder, mounts to the frame of the wheelchair to support crutches when not in use.

Model:

1210

I.V. Pole

Intravenous Drip Pole. Designed specifically to suspend intravenous drip bags.
Popular addition to the G1 Ward Wheelchair.
When ordering please specify the model chair it is to be fitted to as differing brackets are required for differing model chairs.
*Brackets not shown.

Model:

1266

I.V. Pole for RBT and TS

Intrevenous drip pole for Recline Back, Tilt and Tilt Seat wheelchairs, unlike the 1261 IV Pole equipped to G1 etc, the 12661 IV pole has a ball joint in it's shaft to allow the pole angle to be altered to retain the 180 degree position for proper functionality of the drip whilst the chair is in a tilt or recline state.

Model:

12661

Oxygen Bottle Carrier

Oxygen Bottle Carrier, can be fitted to all Glide wheelchairs.
A popular addition to the G1 Ward Wheelchair.
When ordering please specify the model of chair it is to be fitted to as different brackets are required for differing chairs.
*Brackets not shown.

Model:

7711

Tilt Bars RBT, TS

Tilting Bars for Recline Back, Tilt and Tilt Seat wheelchairs, allows the carer to tilt the chair backwards on it's rear wheels to lift the front end to get over obstacles such as road verges.

Model:

7716

Back to menu

Arm Rests

Armrest Adjustable Height

Armrest Adult Adjustable Height, Allows the occupant of the chair to define armrest height in increments of 25mm.

Model:

1010

Armrest Adjustable Height Desk

Adjustable height desk armrest, allows the occupant of the chair to define required height of the armrest whilst still being able to tuck the chair under a standard height desk, this allows the user to retain the functionality of amrest while at a workstation.

Model:

1015

Armrest Desk Arm Non Adjustable

Armrest, desk arm non adjustable height. Allows the occupant of the chair to be able to tuck the chair under a standard height desk, this allows the user to retain the functionality of armrest while at a workstation.

Model:

1025

Armrest Pad - Recliner Blue

Blue Armrest Pad - Recliner

Model:

1045

Armrest Trough Fixed

Specifically designed for users with the requirement of additional support of one or both arms, this specially moulded armrest trough offers support and comfort whilst not sacrificing functionality.
This armrest is especially useful for people with limited or no strength in one arm.
This trough is fixed to the armrest and is not moveable like the 10655 Armrest Trough Swivel.

A popular accessory for the armrest trough is the 72232 Sheepskin Cover.

Model:

10656

Armrest Trough Swivel

Specifically designed for users with the requirement of additional support of one or both arms, this specially moulded armrest trough offers support and comfort whilst not sacrificing functionality.
This armrest is especially useful for people with limited or no strength in one arm. The armrest trough also comes with a swivel joint so the user can remain supported and move the armrest to a better position.

A popular accessory for the armrest trough is the 72232 Sheepskin Cover.

Model:

10655

Back to menu

Castors

Castor Assembly 7" Pneumatic

7" Pneumatic Castor Assembly, consists of:

20120
Wheel 7" Pneumatic 170 x 35

20073
Fork Castor 7"

783841
Nylon Lock Nut M8 T Type Din 985

7827
Washer 8 x 17 x 18G Zinc Plates

78745
Bolt M8 x 80 HEX Zinc Plated

Model:

20065

Back to menu

Seating & Upholstery

Backrest Board, Cushioned, Removeable

Removeable cushioned backrest board for G1, G2, G3 and Series 4 manual and powered wheelchairs. The backrest board is fitted with 4 aluminum frame hooks which sit over and wrap around the sideframe and fits snuggly into the assembly, Bodypoint ClickIt and FixIt are then used to support the hooks in place, this in turn produces a high level of rigidity for the occupant whilst not sacrificing any comfort. Please reference picture for removal / install instructions.

Model:

72201

Backrest Board, Slide In (G1, G2, G3 & S4)

Slide in backrest board for G1, G2, G3 and Series 4 wheelchairs. Designed to offer additional rigidity for the occupant of the chair. The board slides behind the backrest upholstery inside a set of guide rails.

Model:

72202

Backrest Extension

Universal Backrest extension suitable for fitment to any G1, G2, G3, RB, TS or RBT seat.
Available in Black only. Comes with mounting brackets.

Please specify seat width when ordering as the backrest extension's width must match the chair width, to ensure correct fitting.

Model:

1086

Glide Cushion, Various Sizes

Generic Glide Cushion, produced from High impact foam, and extra strong external fabric, this cushion is produced in sizes to suit the wide ranges of chair bases we stock.
Available in Dartex cover or Sail cloth cover

Model:

Various Sizes

Seat Board, Cushioned, Removeable

Removeable cushioned seat board for G1, G2, G3 and Series 4 manual and powered wheelchairs. The seat board is fitted with 4 aluminum frame hooks which sit over the top of the crossover and fits snuggly into the assembly to offer high level of rigidity for the occupant whilst not sacrificing any comfort. Please reference picture for removal / install instructions.

Model:

72200

Seat Board, Drop In

Removable seat board for Series 6 through 9, Can be lifted in and out.

Model:

72204

Seat Board, Slide In (G1, G2, G3 & S4)

Slide in seat board for G1, G2, G3 and Series 4 wheelchairs. Designed to offer additional rigidity for the occupant of the chair. The board slides underneath the slung upholstery on the underchair guide rails.

Model:

72203

Back to menu

Supports

Calf Panel Medium

Calf Panel Medium

Model:

AC003

Calf Panel Medium Padded

Calf Panel Medium Padded

Model:

AC003P

Calf Strap - Various Sizes

Adjustable tension velcro calf strap, suitable for mounting to standard and vertical swingout.
Varying sizes available.

72198
Small Calf Strap

72199
Medium Calf Strap

721991
Large Calf Strap

721992
Extra Large Calf Strap

721993
Extra Extra Large Calf Strap

Model:

Various Sizes

Footplate Adaptor (WIDE)

Wide footplate adaptor.

Model:

12601

Footplate One Piece Flip Up

One piece flip up footplate suitable for fitment to G1, G2, G3, Series 4, 6, 7, 8 and 9.

Model:

1254

Heel Loops

Heel Loops for plastic or aluminium footplates. Used to prevent the foot from sliding backwards on the footplate. Adjustable Tension. *Does not include the footplate or the stem.

Model:

5126

Hip Belt, Non-Padded, Center-Pull, Push Button, L

Hip Belt, Non-Padded, Center-Pull, Push Button, Large, Flat-Mount, 2" webbing

Model:

HB008

Hip Belt, Non-Padded,Center-Pull, Side Release, L

Hip Belt, Non-Padded, Center-Pull, Side Release, Large, Flat-Mount

Model:

HB005

Interlocking Footplate G1 Plastic

Interlocking Footplate G1 Plastic

Model:

77032

Legrest Cadet

Cadet Detachable Legrest. Adjustable length with clamp on aluminium footplate.

Model:

1257

Legrest G1 Vertical

G1 Vertical Legrest. Adjustable length with bolt on aluminium footplate.

Model:

1258

Legrest G1, G3 Elevating

Elevating and angle adjustable swingout legrest with removeable calf pad.
Set legrest elevation by undoing the knob on the side of the legrest to lower the footplate, tighten the knob to lock the footplate in the desired height.
Set legrest angle by using the catch system on the side of the legrest.

Model:

1262

Legrest, Elevating 300mm Footstem

Legrest, Elevating 300mm Footstem. 300mm footstem in lieu of the standard 280mm footstem length. This allows for additional length and adjustment for taller wheelchair occupants.

*Please Note: This code will not provide a complete elevating legrest assembly just the components necessary to extend the footstem length.

Model:

12471L

Stump Support G1 / G3 23cm

23cm Swingaway stump support, bolt on.

Designed to provide support and cushioning to an amputated leg.

Model:

1495

Stump Support G1 / G3 30cm

30cm Swingaway stump support, bolt on.

Designed to provide support and cushioning to an amputated leg.

Model:

1496

Stump Support G1 / G3 40cm

40cm Swingaway stump support, bolt on.

Designed to provide support and cushioning to an amputated leg.

Model:

1497

Back to menu

Trays

Bracket Tray Arm Slide, Flip Up Fold Away

Arm slide bracket for flip up and fold away tray.

Model:

15821

Bracket Tray, Flip Up for Series 6

Arm slide bracket for flip up tray.

Model:

15830

Frame Tray Flip Up and Fold Away

Flip up and fold away tray frame, this consists purely of the frame.

Model:

15820

Tray, Flip up and fold away

Designed to ensure maximum practicality, the Flip up and fold away tray allows the user of the chair to lift the tray upwards and flip it away when not in use.

Model:

1582

Tray, Slide In (Custom)

Tray, slide in complete, this assembly comprises of a tray, a mounting frame and two mounting brackets. The mounting brackets sit underneath the wheelchair arms and the frame can be slid in and out in these mounting brackets.

Model:

15815

Tray, Slide in (FRAME ONLY)

Identical to the 1510 Tray, Slide in complete, though without the actual tray or slide in brackets, this assembly is commonly ordered when an occupant or distributor plan to use their own brand of tray. To fit you will require part no. 15840 Slide in Bracket S6.

Model:

15810

Tray, Slide in (MOUNTING BRACKETS ONLY)

These are the frame slide in mounts found in the 1581 (Tray Slide In) kit. These are commonly ordered by occupants or distributors with intentions to design their own mounting frame or a completely different purpose altogether.

Model:

15811

Tray, Slide in Complete

Tray, slide in complete, this assembly comprises of a tray, a mounting frame and two mounting brackets. The mounting brackets sit underneath the wheelchair arms and the frame can be slid in and out in these mounting brackets.
This system allows an occupant or carer to completely remove the tray when not in use.

Model:

1581

Tray, Slide in Desk Arm (MOUNTING BRACKETS ONLY)

These are the frame slide in mounts found in the 1581 (Tray Slide In) kit, slightly modified to better suit the shorter armrests found on the desk arms. These are commonly ordered by occupants or distributors with intentions to design their own mounting frame or a completely different purpose altogether.

Model:

15812

Tray, Slide in Locking (MOUNTING BRACKETS ONLY)

Very similar to the mounts found in 1581 Tray, Slide in Kit, these mounts differ in that they are locking slides, these mounts come with a lug attached to the side and a knob that once the frame has been inserted into the mount, can be tightened to ensure that the frame will not move. These are commonly ordered by occupants or distributors with intentions to design their own mounting frame or a completely different purpose altogether.

Please note: Locking tray mounting brackets come in different sizes to suit, standard armrests and desk style armrests. Please specify when ordering.

Model:

15813

Back to menu

Wheels

20" Wheel Kit

20" rear wheel kit for Recline Back, Tilt and Tilt Seat manual wheelchairs.

Model:

202722L

Spoke Guard 20"

20" Spoke Guard, can be fitted to any standard 20" spoked rim.

Model:

20315

Spoke Guard 24"

24" Spoke Guard, can be fitted to any standard 24" spoked rim, can not be fitted to aero or spyder rim.

Model:

2031

Back to menu

ISO Standards Approval

Australian Standards have been developed to ensure equipment meets recognised safety and reliability criteria. To achieve this status, equipment must pass a series of tests in which it is put under difficult conditions that are designed to be similar to those that the child or adult may face when the equipment is used. For example, wheelchairs are tested for safhas gained Australian Standard acceptance, it provides a sense of satisfaction and reassurance that it is safe to be used and will do the job.

© 2018 Xtra Care Equipment Follow us on Google+ Site by Bellevue Studios