Folding Manual Wheelchairs

Glide Power Assist

A Manual Wheelchair with Motor Assistance

Reach New Levels of Independence

Operates as per a normal manual wheelchair but with the assistance of a drive motor. The slightest of inclines that were once difficult now seem like you are pushing down hill. The Power Assist System can be fitted to the Adult range of Glide G2 Manual wheelchairs.

125kgMaximum user weight

Owner's Manual

Glide Power Assist Owner's Manual, (1.1 mb)

Order Form

Glide Power Assist Order Form (G2 Leisure Plus), (2.7 mb)

Order Form

Glide Power Assist Order Form (G2 Leisure), (2.7 mb)

Warranty

Many of our products are sourced from different manufacturers and suppliers who have their own individual Warranty Policies.  A general guide explaining warranty coverage can be found below. For more detailed information please refer to the Warranty Section in the PDF Owner’s Manual above.

Any item purchased is warranted from the date of purchase against faults arising due to defects in materials or manufacturing.

Warranty does not cover parts or electrical components damaged by misuse, neglect, accident or improper installation, nor those tampered with, altered or serviced by an agency not authorized by the manufacturer.

Warranty does not cover normal wear and tear, eg tyres and tubes.

All warranty claims must be returned to us for assessment.

• Accessories
• Arm Rests
• Axles
• Brakes
• Castors
• Seating & Upholstery
• Supports
• Trays
• Tyres
• Wheels

Custom Accessories & Fitting

Often a clients circumstances require that an accessory and or wheelchair be modified allowing for correct installation. If a joystick handle is not available in the right style or a foot plate will not sit on the right angle we will exhaust all possibilities in fabricating, adapting or doing whatever we have to do ensuring that they are able to operate and benefit from the accessory effectively.
 
Our extensive knowledge and total commitment to making a client comfortable and confident in their wheelchair is what drives our passion of uniqueness.

Mouse over images for larger view

Accessories

Anti Tip Rollers G2

Designed to reduce the chance of tipping under propulsion or braking.

To install, simply slide the anti tip bar inside the rear quarter frame, align the frame hole with the bar hole and then using a 6mm allen key tighten the bolt on the outside of the frame to secure the anti tip bar to the sideframe.

Model:

5010

Carry Bag Backrest

Large rear mount carry bag, designed to hang from the backrest this bag has plenty of room for the storage of frquently used items.

Model:

1151

Carry Bag G2 Under Seat

G2 Under Seat Carry Bag

Model:

1152

Carry Bag Series 8 Backrest

Backrest carry bag for Series 6, 7, 8 and 9 powered wheelchair.

Model:

1154

Crutch Holder G2

Crutch holder, mounts to the frame of the wheelchair to support crutches when not in use.
*Requires the installation of tilt bars to mount to.

Model:

50965

Tilt Bars G2, S4

Tilting Bars for G2 Manual and Series Power wheelchair, primarily used to assist in the tilting of a wheelchair on its hind wheels to be lifted over obstacles. Can also be used as a means to attach various items to the chair eg. the crutch holder base.

Model:

5139

Back to menu

Arm Rests

Armrest Adjustable Height

Armrest Adult Adjustable Height, Allows the occupant of the chair to define armrest height in increments of 25mm.

Model:

1010

Armrest Adjustable Height Desk

Adjustable height desk armrest, allows the occupant of the chair to define required height of the armrest whilst still being able to tuck the chair under a standard height desk, this allows the user to retain the functionality of amrest while at a workstation.

Model:

1015

Armrest Desk Arm Non Adjustable

Armrest, desk arm non adjustable height. Allows the occupant of the chair to be able to tuck the chair under a standard height desk, this allows the user to retain the functionality of armrest while at a workstation.

Model:

1025

Armrest G2 / S4 Flip up

Armrest G2 / S4 Flip up, Allows the occupant of the chair to flip the armrest up and out of the away behind the chair for when the armrest is not required or a hinderance to the current activity such as using a desk.

Model:

5032

Armrest G2 Sport Type (Standard)

Armrest G2 Sport Type (Standard), Swingout armrest, allows the chair occupant to swing out the armrest to the back of the chair when arm support is not required or a hinderance to the current activity, such as using a desk.

Model:

5020

Armrest Pad - Recliner Blue

Blue Armrest Pad - Recliner

Model:

1045

Armrest Trough Fixed

Specifically designed for users with the requirement of additional support of one or both arms, this specially moulded armrest trough offers support and comfort whilst not sacrificing functionality.
This armrest is especially useful for people with limited or no strength in one arm.
This trough is fixed to the armrest and is not moveable like the 10655 Armrest Trough Swivel.

A popular accessory for the armrest trough is the 72232 Sheepskin Cover.

Model:

10656

Armrest Trough Swivel

Specifically designed for users with the requirement of additional support of one or both arms, this specially moulded armrest trough offers support and comfort whilst not sacrificing functionality.
This armrest is especially useful for people with limited or no strength in one arm. The armrest trough also comes with a swivel joint so the user can remain supported and move the armrest to a better position.

A popular accessory for the armrest trough is the 72232 Sheepskin Cover.

Model:

10655

Back to menu

Axles

Axle Plate Adult

Cambered Axle Plate to suit Adult sized chairs.

Model:

5051

Back to menu

Brakes

Brake Extension G2

G2 Brake Lever Extension.
* Please Note, the brake assembly and clamp are not included.

Model:

5064

Brake Rear Mount G2

Rear mounted brake assembly for G2 manual wheelchairs fitted with 20", 22" and 24" wheels. The kit includes the standard G2 brake assembly and mounting clamps, a bent mounting bar and 25mm to 22mm LS clamp.

Model:

5066

Brake Scissor G2

Scissor brake assembly, with 25mm clamp.
Brake lever extends outwards in an arc to lock out the brake and lock the tyre in position. The graphic provided shows the brake in transition from being off to being put on.
1.) Assembly
Brake Assembly

2.) 50783
25mm to 19mm Clamp

Model:

5080

Brakes Low Mounted

Option to mount your brakes on the lower portion of the front quarter frame.

Model:

No Code

Back to menu

Castors

Castor Assembly 6" Urethane (SPX)

Castor Assembly 6" Urethane, consists of:

200722
Fork Castor 7" - Fork Available in Gold or Black

20123
Wheel 6" Urethane

60629
Spacer 5" Sport and 8" Forks

78731
Bolt M8 x 60 HEX Zinc Plated

783841
Nylon Lock Nut M8 T TYPE Din 985

Model:

200611

Castor Assembly 7"

Standard 7" Castor Assembly Consists of:

20092
Wheel 7" x 1" (Black Hub)

200722
Fork Castor 7" (Black)

78732
Bolt M8 x 65 HEX Zinc Plated

78384
Nylon Lock Nut M8 P Type Din 6924

7827
Washer 8 x 17 x 18G Zinc Plated

Model:

200612

Castor Assembly 7" Pneumatic

7" Pneumatic Castor Assembly, consists of:

20120
Wheel 7" Pneumatic 170 x 35

20073
Fork Castor 7"

783841
Nylon Lock Nut M8 T Type Din 985

7827
Washer 8 x 17 x 18G Zinc Plates

78745
Bolt M8 x 80 HEX Zinc Plated

Model:

20065

Castor Assembly 8" Pneumatic

8" Pneumatic Castor Assembly, consists of:

20121
Wheel 8" Pneumatic (200*50)

20073
Fork Castor 8"

78384
Nylon Lock Nut M8 P TYPE Din 6924

7827
Washer 8 x 17 x 18G Zinc Plated

78745
Bolt M8 x 80 HEX Zinc Plated

Model:

20064

Back to menu

Seating & Upholstery

Backrest Board, Cushioned, Removeable

Removeable cushioned backrest board for G1, G2, G3 and Series 4 manual and powered wheelchairs. The backrest board is fitted with 4 aluminum frame hooks which sit over and wrap around the sideframe and fits snuggly into the assembly, Bodypoint ClickIt and FixIt are then used to support the hooks in place, this in turn produces a high level of rigidity for the occupant whilst not sacrificing any comfort. Please reference picture for removal / install instructions.

Model:

72201

Backrest Board, Slide In (G1, G2, G3 & S4)

Slide in backrest board for G1, G2, G3 and Series 4 wheelchairs. Designed to offer additional rigidity for the occupant of the chair. The board slides behind the backrest upholstery inside a set of guide rails.

Model:

72202

Backrest Extension

Universal Backrest extension suitable for fitment to any G1, G2, G3, RB, TS or RBT seat.
Available in Black only. Comes with mounting brackets.

Please specify seat width when ordering as the backrest extension's width must match the chair width, to ensure correct fitting.

Model:

1086

Backrest Extension G2

Backrest extension suitable for fitment to G2 and S4 seats.
Available in 10cm increments, 10cm, 20cm, 30cm and 40cm.
Custom heights can be attained by attaching two backrest extensions together.
Available in Black only. Comes with mounting brackets.

Please specify seat width when ordering as the backrest extension's width must match the chair width, to ensure correct fitting.

Model:

5062

Backrest Vertical

Vertical backrest, option to standard alignment, incurs no additional charge.

Model:

No Code

Connecting Flap Backrest to Seat

Connecting flap, integrated into the backrest upholstery for G2 and Series 4 wheelchairs, connects to the seat panel via velcro.
Ideal for securing aftermarket cushions and ensuring they don't slide out the back, it also assists in as the chair ages the panels will stretch slightly this flap ensures that the gap between the backrest upholstery and the seat upholstery remains consistent for years to come.

Model:

720950

Fold Down and Removable Backrest option

Optional addition to any G2 manual wheelchair, where it allows the user to drop down the backrest panel for easy storage.
To drop the panel two locking pins at the back must be lifted this allows the backrest to tilt forward, to remove lift on the panel once it has been lowered.
*Please Note: When the this option is checked the chair is unable to fold when the backrest is fitted.

Model:

5995

Glide Cushion, Various Sizes

Generic Glide Cushion, produced from High impact foam, and extra strong external fabric, this cushion is produced in sizes to suit the wide ranges of chair bases we stock.
Available in Dartex cover or Sail cloth cover

Model:

Various Sizes

Seat Board, Cushioned, Removeable

Removeable cushioned seat board for G1, G2, G3 and Series 4 manual and powered wheelchairs. The seat board is fitted with 4 aluminum frame hooks which sit over the top of the crossover and fits snuggly into the assembly to offer high level of rigidity for the occupant whilst not sacrificing any comfort. Please reference picture for removal / install instructions.

Model:

72200

Seat Board, Slide In (G1, G2, G3 & S4)

Slide in seat board for G1, G2, G3 and Series 4 wheelchairs. Designed to offer additional rigidity for the occupant of the chair. The board slides underneath the slung upholstery on the underchair guide rails.

Model:

72203

Side Guard Adult, Plastic

Plastic side guard, used to shield the thighs and hips from the tyres and frame, and to also provide hip support to the occupant of the chair.

Model:

5165

Side Guard G2 Cloth

Cloth G2 side guard, used to shield the thighs and hips from the tyres and frame.
The G2 cloth side guard mounts underneath the seat upholstery rails, requiring the removal of the seat screws, then holding the side guard in position under the seat whilst the seat screws are driven back in. The top section of the guard is fitted with velcro which attaches itself to the inside of the backrest. In this way tension can be defined, by moving the velcro strip tension or slack can be created.

Model:

51651

Upholstery Tightener G2, G3, Series 4

Upholstery tightener for G2 and G3 manually propelled wheelchairs and Series 4 powered wheelchairs. Tightens the backrest upholstery panel to ensure additional rigidity for the occupant.

Model:

1327

Back to menu

Supports

Bodypoint Hip Grip

Bodypoint Hip Grip

The Hip Grip is an innovative dynamic pelvic stabilization device that assists the wheelchair user to maintain pelvic stability while allowing functional pelvic movements. The Hip Grip allows the pelvis to perform a natural anterior and posterior range of motion, while providing variable resistance to bring the pelvis back to its neutral posture. The combination of improved pelvic positioning and dynamic pelvic movement enhances sitting posture and improves functional activities, such as reaching and propelling the wheelchair. Users in clinical trials experienced dramatic improvement in reach and range of motion.

Model:

HG1 - S, HG1 - M

Calf Panel Medium

Calf Panel Medium

Model:

AC003

Calf Panel Medium Padded

Calf Panel Medium Padded

Model:

AC003P

Calf Strap - Various Sizes

Adjustable tension velcro calf strap, suitable for mounting to standard and vertical swingout.
Varying sizes available.

72198
Small Calf Strap

72199
Medium Calf Strap

721991
Large Calf Strap

721992
Extra Large Calf Strap

721993
Extra Extra Large Calf Strap

Model:

Various Sizes

Footplate 40 - 43cm Aluminium

40 - 43cm Aluminium footplate, optional addition, in lieu of standard plastic footplates.

Model:

1255

Footplate Adaptor (WIDE)

Wide footplate adaptor.

Model:

12601

Footplate One Piece Flip Up

One piece flip up footplate suitable for fitment to G1, G2, G3, Series 4, 6, 7, 8 and 9.

Model:

1254

Footplate One Piece Special

Designed specifically for short knee to heel lengths where the occupant requires the footplate be quite close to the baseline of the seat.

Model:

12514

Heel Loops

Heel Loops for plastic or aluminium footplates. Used to prevent the foot from sliding backwards on the footplate. Adjustable Tension. *Does not include the footplate or the stem.

Model:

5126

Hip Belt, Non-Padded, Center-Pull, Push Button, L

Hip Belt, Non-Padded, Center-Pull, Push Button, Large, Flat-Mount, 2" webbing

Model:

HB008

Hip Belt, Non-Padded,Center-Pull, Side Release, L

Hip Belt, Non-Padded, Center-Pull, Side Release, Large, Flat-Mount

Model:

HB005

Interlocking Footplate G2 Plastic

Interlocking Footplate G2 Plastic

Model:

77033

Legrest G2, S4 Elevating

Elevating and angle adjustable swingout legrest.
Set legrest elevation by undoing the knob on the side of the legrest to lower the footplate, tighten the knob to lock the footplate in the desired height.
Set legrest angle by using the catch system on the side of the legrest.

Model:

5111

Legrest G2, S4 Swing away Vertical

Complete vertical swing away legrest including height adjustable, flip up aluminium footplate. Footplate stem is bolt on type.
Ideal for occupants with short heel to knee length.
Ideal for fitment to G2 and Series 4 wheelchairs.

Model:

51433

Legrest, Elevating 300mm Footstem

Legrest, Elevating 300mm Footstem. 300mm footstem in lieu of the standard 280mm footstem length. This allows for additional length and adjustment for taller wheelchair occupants.

*Please Note: This code will not provide a complete elevating legrest assembly just the components necessary to extend the footstem length.

Model:

12471L

Stump Support G1 / G3 23cm

23cm Swingaway stump support, bolt on.

Designed to provide support and cushioning to an amputated leg.

Model:

1495

Stump Support G1 / G3 30cm

30cm Swingaway stump support, bolt on.

Designed to provide support and cushioning to an amputated leg.

Model:

1496

Stump Support G1 / G3 40cm

40cm Swingaway stump support, bolt on.

Designed to provide support and cushioning to an amputated leg.

Model:

1497

Back to menu

Trays

Bracket Tray Arm Slide in Deluxe

Mounting Bracket for deluxe slide in tray, the bracket mounts under the armrest out of the way for when the tray is not installed, when the tray is required its mounting bar slides smoothly inside the tube of the mounting bracket, securing it in place for use.

Model:

15840

Frame Tray Flip Up and Fold Away

Flip up and fold away tray frame, this consists purely of the frame.

Model:

15820

Tray, Flip up and fold away

Designed to ensure maximum practicality, the Flip up and fold away tray allows the user of the chair to lift the tray upwards and flip it away when not in use.

Model:

1582

Tray, Flip up and fold away

Designed to ensure maximum practicality, the Flip up and fold away tray allows the user of the chair to lift the tray upwards and flip it away when not in use.

Model:

1582

Tray, Slide in (FRAME ONLY)

Identical to the 1510 Tray, Slide in complete, though without the actual tray or slide in brackets, this assembly is commonly ordered when an occupant or distributor plan to use their own brand of tray. To fit you will require part no. 15840 Slide in Bracket S6.

Model:

15810

Tray, Slide in (MOUNTING BRACKETS ONLY)

These are the frame slide in mounts found in the 1581 (Tray Slide In) kit. These are commonly ordered by occupants or distributors with intentions to design their own mounting frame or a completely different purpose altogether.

Model:

15811

Tray, Slide in Complete

Tray, slide in complete, this assembly comprises of a tray, a mounting frame and two mounting brackets. The mounting brackets sit underneath the wheelchair arms and the frame can be slid in and out in these mounting brackets.
This system allows an occupant or carer to completely remove the tray when not in use.

Model:

1581

Tray, Slide in Desk Arm (MOUNTING BRACKETS ONLY)

These are the frame slide in mounts found in the 1581 (Tray Slide In) kit, slightly modified to better suit the shorter armrests found on the desk arms. These are commonly ordered by occupants or distributors with intentions to design their own mounting frame or a completely different purpose altogether.

Model:

15812

Tray, Slide in Locking (MOUNTING BRACKETS ONLY)

Very similar to the mounts found in 1581 Tray, Slide in Kit, these mounts differ in that they are locking slides, these mounts come with a lug attached to the side and a knob that once the frame has been inserted into the mount, can be tightened to ensure that the frame will not move. These are commonly ordered by occupants or distributors with intentions to design their own mounting frame or a completely different purpose altogether.

Please note: Locking tray mounting brackets come in different sizes to suit, standard armrests and desk style armrests. Please specify when ordering.

Model:

15813

Back to menu

Tyres

Tube 24" x 1 3/8" Thorn Proof

Thorn Proof 24" x 1 3/8" tyre tube suitable for fitment to any 24" tyre. Ideal for BMX tyres.

Model:

20254

Tyre 24" x 1 3/8" High Pressure

High Pressure sports tyre in lieu of the standard pneumatic, offers a more precise feel for turning and locomotion.

Model:

202631l

Tyre 24" x 1 3/8" Solid Polyurethane Grey

24" x 1 3/8" Solid Polyurethane Grey Tyre

*** Please Note ***
When ordering please specify whether or not you require a tube.
As order codes provided are purely for the tyre.
Tubes are shown in the graphics to provide you with an accurate depiction of what they will look like inflated.

Model:

20267

Back to menu

Wheels

Spoke Guard 20"

20" Spoke Guard, can be fitted to any standard 20" spoked rim.

Model:

20315

Spoke Guard 24"

24" Spoke Guard, can be fitted to any standard 24" spoked rim, can not be fitted to aero or spyder rim.

Model:

2031

Back to menu

There is no overview for the Glide Manual Wheelchair with Power Assist.

Back to menu