Everyone who commutes in a wheelchair undertstands how important it is to be comfortable in a practical and easy to use chair.
At Xtracare, we understand these neccessities and go that Xtra Step with every individual, ensuring that each unique circumstance is attended to with the Care that it deserves.
Printed Brochure
If you would like a printed copy please contact us and include your address and the word 'Brochure' in the Online Enquiry form.
Features of a Fixed Frame Chair within a Traditional Folding Chair
The Glide G2 Cruz manual wheelchair was designed specifically to offer the style and advantages of a fixed frame wheelchair within a traditional folding frame. This chair offers increased stability for those who are more active but also seek the functionality of a collapseable lightweight chair. Available in our latest powdercoat finishes this chair looks fantastic equipped with our lightweight AERO wheel.
ISO Standards ApprovedModel: GLCR
| Brakes | |
|---|---|
| Brakes | Manual push on |
| Colour | |
| Frame Colours | |
| Dimensions | |
| Back Height | 31, 34, 37, 40, 43, 46cm |
| Seat Depth | 37, 40, 43, 46, 49cm |
| Seat Height | 51cm |
| Seat Width | 37, 40, 43, 46, 49cm |
| Seating & Supports | |
| Arm Rests | Swingout armrests |
| Backrest | Adjustable tension back upholstery |
| Leg Rests | One piece |
| Seat Upholstery | Sailcloth with adjustment on seat |
| Weights | |
| Chair Weight | 14.5kg |
| Weight Capacity | 150kg |
| Wheels | |
| Front Castors | 6" urethane castors |
| Rear | 24" quick release |
Glide G2 Cruz Wheelchair Product Brochue, (4 mb)
Glide 2 Series Owner's Manual, (370.3 kb)
Glide G2 Cruz Order Form, (1.7 mb)
Many of our products are sourced from different manufacturers and suppliers who have their own individual Warranty Policies. A general guide explaining warranty coverage can be found below. For more detailed information please refer to the Warranty Section in the PDF Owner’s Manual above.
Any item purchased is warranted from the date of purchase against faults arising due to defects in materials or manufacturing.
Warranty does not cover parts or electrical components damaged by misuse, neglect, accident or improper installation, nor those tampered with, altered or serviced by an agency not authorized by the manufacturer.
Warranty does not cover normal wear and tear, eg tyres and tubes.
All warranty claims must be returned to us for assessment.
Often a clients circumstances require that an accessory and or wheelchair be modified allowing for correct installation. If a joystick handle is not available in the right style or a foot plate will not sit on the right angle we will exhaust all possibilities in fabricating, adapting or doing whatever we have to do ensuring that they are able to operate and benefit from the accessory effectively.
Our extensive knowledge and total commitment to making a client comfortable and confident in their wheelchair is what drives our passion of uniqueness.
Mouse over images for larger view
Designed to reduce the chance of tipping under propulsion or braking.
To install, simply slide the anti tip bar inside the rear quarter frame, align the frame hole with the bar hole and then using a 6mm allen key tighten the bolt on the outside of the frame to secure the anti tip bar to the sideframe.
5010
Designed to reduce the chance of tipping under propulsion or braking.
To install, simply slide the anti tip bar inside the rear quarter frame, align the frame hole with the bar hole and then using a 6mm allen key tighten the bolt on the outside of the frame to secure the anti tip bar to the sideframe.
50101
Large rear mount carry bag, designed to hang from the backrest this bag has plenty of room for the storage of frquently used items.
1151
G2 Under Seat Carry Bag
1152
Backrest carry bag for Series 6, 7, 8 and 9 powered wheelchair.
1154
SPXtreme and Hyper fixed under seat carry bag.
Suitable for carrying frequently required items.
1156
Under seat carry bag for SPXtreme and Hyper manual wheelchairs. Comprised of lightweight black mesh and an elastic opening this under seat carry bag is ideal for carrying items that are frequently used.
1158
Tilting Bars for G2 Manual and Series Power wheelchair, primarily used to assist in the tilting of a wheelchair on its hind wheels to be lifted over obstacles. Can also be used as a means to attach various items to the chair eg. the crutch holder base.
5139
Adjustable height desk armrest, allows the occupant of the chair to define required height of the armrest whilst still being able to tuck the chair under a standard height desk, this allows the user to retain the functionality of amrest while at a workstation.
1015
Armrest G2 / S4 Flip up, Allows the occupant of the chair to flip the armrest up and out of the away behind the chair for when the armrest is not required or a hinderance to the current activity such as using a desk.
5032
Armrest G2 Sport Type (Standard), Swingout armrest, allows the chair occupant to swing out the armrest to the back of the chair when arm support is not required or a hinderance to the current activity, such as using a desk.
5020
Swingaway and removable armrest for G2 manual wheelchairs. Fitted with foam armrest pad. To swing away simply lift the armrest up and then rotate outwards from the chair, to lock the armrest simply rotate until the armrest drops slightly this means the key on the bottom has locked. To remove simply lift upwards.
5025
Swingaway and removable armrest for G2 manual wheelchairs. Fitted with moulded armrest pad. To swing away simply lift the armrest up and then rotate outwards from the chair, to lock the armrest simply rotate until the armrest drops slightly this means the key on the bottom has locked. To remove simply lift upwards.
5030
Designed for occupants with loss in dexterity, where the depression of the QR button may be difficult these levers can be pulled upwards to release the axle and hence removing the wheel.
1.) 20003
Axle QR Lever Release
2.) 600171
Socket G2 Q.R. (1/2" X 49mm)
3.) 60018
Nut QR Socket
20003L
G2 Brake Lever Extension.
* Please Note, the brake assembly and clamp are not included.
5064
Rear mounted brake assembly for G2 manual wheelchairs fitted with 20", 22" and 24" wheels. The kit includes the standard G2 brake assembly and mounting clamps, a bent mounting bar and 25mm to 22mm LS clamp.
5066
Option to mount your brakes on the lower portion of the front quarter frame.
No Code
Castor Assembly 4" Blade Type, consists of:
2007
Fork Castor 5" (Sport) Long - Fork Available in Gold or Black
20117
Wheel 4" Blade Type
60628
Spacer 5" Sport Wheel
60629
Spacer 5" Sport and 8" Forks
783841
Bolt M8 x 60 HEX Zinc Plated
783841
Nylon Lock Nut M8 T TYPE Din 985
20058
Castor Assembly 4" Urethane, consists of:
2007
Fork Castor 5" (Sport) Long - Fork Available in Gold or Black
20118
Wheel 4" Urethane
60628
Spacer 5" Sport Wheel
60629
Spacer 5" Sport and 8" Forks
78731
Bolt M8 x 60 HEX Zinc Plated
783841
Nylon Lock Nut M8 T TYPE Din 985
20059
Castor Assembly 5" Urethane, consists of:
2007
Fork Castor 5" (Sport) Long - Fork Available in Gold or Black
20119
Wheel 5" Urethane
60628
Spacer 5" Sport Wheel
60629
Spacer 5" Sport and 8" Forks
78731
Bolt M8 x 60 HEX Zinc Plated
783841
Nylon Lock Nut M8 T TYPE Din 985
20054
Backrest extension suitable for fitment to G2 and S4 seats.
Available in 10cm increments, 10cm, 20cm, 30cm and 40cm.
Custom heights can be attained by attaching two backrest extensions together.
Available in Black only. Comes with mounting brackets.
Please specify seat width when ordering as the backrest extension's width must match the chair width, to ensure correct fitting.
5062
Vertical backrest, option to standard alignment, incurs no additional charge.
No Code
Optional addition to any G2 manual wheelchair, where it allows the user to drop down the backrest panel for easy storage.
To drop the panel two locking pins at the back must be lifted this allows the backrest to tilt forward, to remove lift on the panel once it has been lowered.
*Please Note: When the this option is checked the chair is unable to fold when the backrest is fitted.
5995
Generic Glide Cushion, produced from High impact foam, and extra strong external fabric, this cushion is produced in sizes to suit the wide ranges of chair bases we stock.
Available in Dartex cover or Sail cloth cover
Various Sizes
Removeable cushioned seat board for G1, G2, G3 and Series 4 manual and powered wheelchairs. The seat board is fitted with 4 aluminum frame hooks which sit over the top of the crossover and fits snuggly into the assembly to offer high level of rigidity for the occupant whilst not sacrificing any comfort. Please reference picture for removal / install instructions.
72200
Plastic side guard, used to shield the thighs and hips from the tyres and frame, and to also provide hip support to the occupant of the chair.
5165
Cloth G2 side guard, used to shield the thighs and hips from the tyres and frame.
The G2 cloth side guard mounts underneath the seat upholstery rails, requiring the removal of the seat screws, then holding the side guard in position under the seat whilst the seat screws are driven back in. The top section of the guard is fitted with velcro which attaches itself to the inside of the backrest. In this way tension can be defined, by moving the velcro strip tension or slack can be created.
51651
Bodypoint Hip Grip
The Hip Grip is an innovative dynamic pelvic stabilization device that assists the wheelchair user to maintain pelvic stability while allowing functional pelvic movements. The Hip Grip allows the pelvis to perform a natural anterior and posterior range of motion, while providing variable resistance to bring the pelvis back to its neutral posture. The combination of improved pelvic positioning and dynamic pelvic movement enhances sitting posture and improves functional activities, such as reaching and propelling the wheelchair. Users in clinical trials experienced dramatic improvement in reach and range of motion.
HG1 - S, HG1 - M
Calf Panel Medium
AC003
Calf Panel Medium Padded
AC003P
Adjustable tension velcro calf strap, suitable for mounting to standard and vertical swingout.
Varying sizes available.
72198
Small Calf Strap
72199
Medium Calf Strap
721991
Large Calf Strap
721992
Extra Large Calf Strap
721993
Extra Extra Large Calf Strap
Various Sizes
Designed specifically for short knee to heel lengths where the occupant requires the footplate be quite close to the baseline of the seat.
12514
Heel Loops for plastic or aluminium footplates. Used to prevent the foot from sliding backwards on the footplate. Adjustable Tension. *Does not include the footplate or the stem.
5126
Hip Belt, Non-Padded, Center-Pull, Push Button, Large, Flat-Mount, 2" webbing
HB008
Hip Belt, Non-Padded, Center-Pull, Side Release, Large, Flat-Mount
HB005
Interlocking Footplate Aluminium
77031
Interlocking Footplate G2 Plastic
77033
Identical to the 1510 Tray, Slide in complete, though without the actual tray or slide in brackets, this assembly is commonly ordered when an occupant or distributor plan to use their own brand of tray. To fit you will require part no. 15840 Slide in Bracket S6.
15810
These are the frame slide in mounts found in the 1581 (Tray Slide In) kit. These are commonly ordered by occupants or distributors with intentions to design their own mounting frame or a completely different purpose altogether.
15811
Tray, slide in complete, this assembly comprises of a tray, a mounting frame and two mounting brackets. The mounting brackets sit underneath the wheelchair arms and the frame can be slid in and out in these mounting brackets.
This system allows an occupant or carer to completely remove the tray when not in use.
1581
Very similar to the mounts found in 1581 Tray, Slide in Kit, these mounts differ in that they are locking slides, these mounts come with a lug attached to the side and a knob that once the frame has been inserted into the mount, can be tightened to ensure that the frame will not move. These are commonly ordered by occupants or distributors with intentions to design their own mounting frame or a completely different purpose altogether.
Please note: Locking tray mounting brackets come in different sizes to suit, standard armrests and desk style armrests. Please specify when ordering.
15813
Thorn Proof 24" x 1 3/8" tyre tube suitable for fitment to any 24" tyre. Ideal for BMX tyres.
20254
High Pressure sports tyre in lieu of the standard pneumatic, offers a more precise feel for turning and locomotion.
202631l
24" x 1 3/8" Solid Polyurethane Grey Tyre
*** Please Note ***
When ordering please specify whether or not you require a tube.
As order codes provided are purely for the tyre.
Tubes are shown in the graphics to provide you with an accurate depiction of what they will look like inflated.
20267
24" x 1.75 BMX Polyurethane Black Tyre
*** Please Note ***
When ordering please specify whether or not you require a tube.
As order codes provided are purely for the tyre.
Tubes are shown in the graphics to provide you with an accurate depiction of what they will look like inflated.
20268
As opposed to offsetting the pushrim using the standard set of 4 pushrim connecting rods, we use a set of 8. This item can only be selected in lieu of the standard connecting rods
1315L
0.5" Gap for 24" 20mm Diameter Stainless Steel Pushrim, essentially brings the pushrim closer to the wheel rim by reducing the height of the standoff.
13051L
24" Pushrim incorporating 8 vertical pushrim standoffs as opposed to the standard 4.
1295
Plastic coated 24" pushrims
13002l
The new generation of handrim for paraplegic and tetraplegic users that offers excellent propulsion, comfort, reliability and safety never before seen in conventional handrims.
Long life - no problem - just reorder a latex free replaceable rubber band and you are back in motion.
Maxgrepp Ergo Para - the new way to Glide
Only available for standard 24" wheels - not suitable for Aero or Spiderwheels.
13100
20" Spoke Guard, can be fitted to any standard 20" spoked rim.
20315
24" Spoke Guard, can be fitted to any standard 24" spoked rim, can not be fitted to aero or spyder rim.
2031
20" Reinforced Chrome BMX Wheel, Quick Release Hub with BMX tyres.
202858
The All New 24" - 3 spoke Aluminium Wheel
takes 1/2" quick release axle.
Fitted with High pressure tyre 24" x 1"
202859
24" Aero Wheel, Suitable for G2 but can be fitted to any manual chair.
Black Onyx in colour, 19.0mm Stainless Steel Pushrim.
20277
24" Sports wheel, includes High Pressure Sports Tyres with low profile sidewalls.
202631 Tyre 24" x 1 3/8 x 1 1/16 High Pressure
202844
The All New 24" Spyder Wheel.
Available in 5 High Gloss Powder Coat finishes this is guarenteed to add style to your chair's appearance.
Finishes available are:
Red
Copper
Silver
Blue
Black
Spyder wheels are only available in 24" and suit a standard 24" tyre.
*Red Spyder Wheel Shown, Spyder wheel colours are not identical to the powdercoat finishes applied to Glide wheelchair frames.
20278
There is no overview for the Glide G2 Cruz Wheelchair.
Australian Standards have been developed to ensure equipment meets recognised safety and reliability criteria. To achieve this status, equipment must pass a series of tests in which it is put under difficult conditions that are designed to be similar to those that the child or adult may face when the equipment is used. For example, wheelchairs are tested for safhas gained Australian Standard acceptance, it provides a sense of satisfaction and reassurance that it is safe to be used and will do the job.
© 2010 Xtra Care Equipment Site by Bellevue Studios
