Angled Transfer Board

For Side Transfers To and From a Wheelchair

Unique Low Friction Coating Gives More Slip and Less Grip

A smaller transfer board angled at one end to allow better positioning around the wheel of a wheelchair for side transfers. Available in plywood for no flex general transfer use or in slightly flexible PVC for transfers with slight height variation.

110kgMaximum user weight

Model: TA15860 (12mm Ply), TA15869 (12mm Ply with Grip on Base), TA15833 (6mm PVC), TA15839 (6mm Ply with Grip on Base)

Length 600mm
Thickness 6mm PVC or 12mm plywood
Width 250mm
Construction Smooth PVC or varnished plywood

There are no accessories for the Tech-Assist Angled Transfer Boards.

Key Features

  • 15860 (ply) 600mm x 250mm x 12mm
  • 15833 (PVC) 600mm x 250mm x 6mm
  • Angled end to allow room for wheelchair wheel
  • Unique low friction coating gives more slip and less grip
  • Rounded edges and radius corners provide a smooth and safe transfer for both client and carer
  • Available with or without grip on the underside
  • Hygienic; easily cleaned by wiping over with mild detergent or non-alcohol based disinfectant

Back to menu

ISO Standards Approval

Australian Standards have been developed to ensure equipment meets recognised safety and reliability criteria. To achieve this status, equipment must pass a series of tests in which it is put under difficult conditions that are designed to be similar to those that the child or adult may face when the equipment is used. For example, wheelchairs are tested for safhas gained Australian Standard acceptance, it provides a sense of satisfaction and reassurance that it is safe to be used and will do the job.

© 2018 Xtra Care Equipment Follow us on Google+ Site by Bellevue Studios